The further improved ATK Raider Evo 11 touring binding combines the best of the Raider models. In addition, there is a toe piece with variably adjustable release values, which is unique for pin bindings and provides extra safety. The new, coloured base plates made from CNC-milled 7075 aluminium on the heel piece provide even more stability.

The easy-entry geometry ensures even easier entry, as there is no longer a visible spring. This means no snow, ice or stones to cling to. In the open position, the locking lever also serves as an ‘optical stop’ when entering. There is also an automatic ski stopper on the heel piece.

The new ATK Raider Evo 11 thus defines a new level of safety, reliability and comfort for today's freeriders! 

Features:
• Variably adjustable vertical and lateral release values on the toe piece
• walking positions flat, +24 mm, +49 mm
• Only 370g weight per binding incl. stopper
• Made from the highest quality CNC-milled 7075 aircraft aluminium
• 25 mm adjustment range
• 12 mm binding elasticity
• Compatible with the optionally available freeride spacerAL09 to optimise power transmission in the heel area
• with coloured base plate on the rear toe made from CNC-milled 7075 aluminium

According to manufacturer bindings are ideal for:
80 - 120 mm ski waist
1000 - 1700 g ski weight
30 - 95 kg skiers weight

Materials: Alu 7075, POM, Stainless steel

Technology

CAM Release System
The CAM Release System is fitted inside of our touring bindings heel parts in order to drive the boot step-in and vertical release in case of fall. A special CAM profile is pressed towards the heel pins by a pre-tensioned spring: when the step-in or a fall release occur, the pins are forced to go through the CAM profile which provides a precise resistance to the pin release, depending on the release value set on the binding.

Elastic Response System
Skis flex when compressed or while jumping, thanks to Elastic Response System the heel piece slides towards the tail and repositions itself once normal conditions are restored.

ESS
This system is characterised by a new design of the toe part. A smooth step-in which is safe and easy to fit, available on all the latest models and effective even if the soles are worn.

Magneto Heel Flaps
An ingenious as simple magnet system provides the handling and stabilization of the heel flaps.

Snow Pack Proof
A special design of the toe part that avoids any snow/ice/debris build-up under the hooking elements.

Uphill Hardness Variator
A multi-position selector is inserted between the front lever and the toe lug. By changing the setting of the selector, the stiffness of the toe-lug lock in up-hill mode can be adjusted by increasing pressure on the locking system.

Automatic Brake System
An extraordinary innovative system which requires no further action for activating the rear skibrake. The mechanism is automatically set and by switching from ascent to descent mode, the skibrake is activated without any further action.

Release Adjustment Toe Piece
Heel release adjustments are now available on the toe piece: The new toe piece from ATK Bindings features adjustable release values and, in combination with the heel piece, provides top class stability.

EVO Brake System
Thanks to the EVO system, you only need one hand to operate the ski brake. Once you have turned the heel binding head 180 degrees, a simple step is enough to lock the ski brake and start the ascent. Similarly, after a further turn, the ski brake is activated and the binding switches from ascent to descent mode. At this point, a simple step-in is enough to start skiing.

Please note: the selected stopper size should be the next largest, based on the center width of the ski (example: center width 95mm -> 100mm stopper). The selection "Size" corresponds to the stopper width.