ATK Freeraider 15 EVO incl. Stoppers Alpine Touring Bindings Yellow / Black / Yellow

ATK Freeraider 15 is the ultimate, lightweight pin binding for downhill-oriented ski tourers, as well as demanding freetourers and freeriders!

It has the same features of Raider 13 but with a higher release range. AL13 Freeride Spacer is included.

Features:
• Material: Alu 7075, POM, stainless steel
• Release value: 7-15
• Adjustment range rear jaws: 25 mm
• Climbing assistance: +35, +49 mm
• Length compensation: 14 mm (E.R.S)
• AL13 Freeride Spacer incl.

Recommended ski width: 97 - 120 mm

Technology

CAM Release System
The CAM Release System is fitted inside of our touring bindings heel parts in order to drive the boot step-in and vertical release in case of fall. A special CAM profile is pressed towards the heel pins by a pre-tensioned spring: when the step-in or a fall release occur, the pins are forced to go through the CAM profile which provides a precise resistance to the pin release, depending on the release value set on the binding.

Elastic Response System
Skis flex when compressed or while jumping, thanks to Elastic Response System the heel piece slides towards the tail and repositions itself once normal conditions are restored.

ESS
This system is characterised by a new design of the toe part. A smooth step-in which is safe and easy to fit, available on all the latest models and effective even if the soles are worn.

Magneto Heel Flaps
An ingenious as simple magnet system provides the handling and stabilization of the heel flaps.

Snow Pack Proof
A special design of the toe part that avoids any snow/ice/debris build-up under the hooking elements.

Uphill Hardness Variator
A multi-position selector is inserted between the front lever and the toe lug. By changing the setting of the selector, the stiffness of the toe-lug lock in up-hill mode can be adjusted by increasing pressure on the locking system.

Please note: the selected stopper size should be the next largest, based on the center width of the ski (example: center width 95mm -> 100mm stopper). The selection "Size" corresponds to the stopper width.
When ordering a set we automatically mount the suitable stoppers without surcharge.