With the ATK Raider 13 EVO touring binding you can fully concentrate on skiing.

From the automatic EVO braking system to the adjustable heel and toe release values, this binding offers a wide range of adjustment options.

Technical Features:

Cam Release System
The CAM release system controls the entry and vertical release in the event of a fall. A special CAM profile is pushed towards the heel pins by a preloaded spring: when stepping in or releasing, the pins are forced to follow the CAM profile and ensure a precise release.

Magneto Heel Flap System
As ingenious as it is simple, this magnetic system provides handling and stabilization of the heel flaps. There are several versions of the heel flaps, each paired with the correct binding model.

Elastic Response System
Under load, skis bend and compress. Under these conditions, thanks to ELASTIC RESPONSE SYSTEM®, the heel piece can slide towards the end and repositions itself once normal conditions are restored.

Evo Brake System
Thanks to the EVO system, a single hand is enough to operate the ski brake. Turning the binding head 180 degrees activates the ski brake and the binding switches from uphill to downhill mode. At this point, simply step in to lock the brake. By turning again and pressing the boot heel on the rear plat.

Easy Entry System
This system is characterized by a new design of the forefoot. Its geometries allow a smooth, safe and easy entry into all current boot models. Effective even when the soles are worn.

Up-Hill Hardness Variator System
A multi-position selector switch between the front lever and the front nose. By changing the setting of the selector switch, the stiffness of the lane lock in uphill mode can be adjusted by increasing the pressure on the locking system.

Snow Pack Proof System
No snow drifts under the toe section, even with multiple uphill/downhill transitions. This also avoids snow loads on the toe piece, ensuring perfect ease at every moment.

Release Adjustment Toe Piece
The adjustable values of the heel release are now available for the toe piece! The new toes from ATK Bindings feature the adjustable release values, which in combination with the heel piece adjustment provide first-class stability and a more precise release.

Details:
• Z-Value Adjustment: 5-13
• Z-value range: 5-13
• Climbing Aids: Flat | +26 mm | +46.5 mm
• Adjustment for sole size: 25 mm
• Elastic heel travel: 14 mm
• Adjustable toe
• Ski brake system: EVO
• Ideal for ski width: 80 - 120 mm
• Ski weight: 1000 - 1700 g
• Weight of the skier: 50 - 110 kg

Material:
Alu 7075, POM, stainless steel

Please note: The selected stopper size should be the next largest, based on the center width of the ski (example: center width 95mm -> 100mm stopper). The selection "Size" corresponds to the stopper width.
When ordering a set we automatically mount the suitable stoppers without surcharge.