The ATK Raider 10 AP incl. Stopper is a freetouring oriented alpine touring binding that combines a pleasant ascent with maximum downhill fun.

ATK's constant attention to the light skier. With the new semi-automatic AP Brake System as the latest addition, the legendary Raider is even more complete and high-performance. The Raider family is enriched by a version dedicated to light freeriders. The technical features of the ATK Raider 10 are the same as those of its brother Raider 12 only with lower release from 4-10.

Features:
• Materials Alu 7075, POM, Stainless Steel
• Release 4-10
• Adjustment 25 mm
• Walking modes: Flat, +24 mm, +49 mm
• Heel elastic travel: 14 mm (E.R.S.)
• Adjustment: 25 mm

According to manufacturer bindings are ideal for:
80 - 120 mm ski waist
1000 - 1700 g ski weight

Technology

CAM Release System
The CAM Release System is fitted inside of our touring bindings heel parts in order to drive the boot step-in and vertical release in case of fall. A special CAM profile is pressed towards the heel pins by a pre-tensioned spring: when the step-in or a fall release occur, the pins are forced to go through the CAM profile which provides a precise resistance to the pin release, depending on the release value set on the binding.
- Provides the best downhill performance on the market, with consistent and unrivalled reduction of
boot-torsion.
- Extremely precise release performance.
- Provides the easiest step-in heel in the sector.
- Compact dimensions and exceptionally light.

Elastic Response System
Skis flex when compressed or while jumping, thanks to Elastic Response System the heel piece slides towards the tail and repositions itself once normal conditions are restored.
- Safeguards the natural flexibility of skis.
- Enhanced release mechanism in the event of falls.
- Reduces the pressure on the ski-boot-binding system.

ESS
This system is characterised by a new design of the toe part. A smooth step-in which is safe and easy to fit, available on all the latest models and effective even if the soles are worn.

Uphill Hardness Variator
A multi-position selector is inserted between the front lever and the toe lug. By changing the setting of the selector,
the stiffness of the toe-lug lock in up-hill mode can be adjusted by increasing pressure on the locking system.

Snow Pack Proof
A special design of the toe part that avoids any snow/ice/debris build-up under the hooking elements.

Magneto Heel Flaps
An ingenious as simple magnet system provides the handling and stabilization of the heel flaps.

Please note: The selected stopper size should be the next largest, based on the center width of the ski (example: center width 95mm -> 100mm stopper). The selection "Size" corresponds to the stopper width.