The CR07+ Classic roller ski from SRB has been continuously developed over the last few years together with top athletes. It is the best training and competition roller for the classic technique that SRB has ever built and has what it takes to become the reference product on the market.

The tuned SRB wheel with a wheel diameter of 70 mm and a width of 45 mm impresses with its excellent riding characteristics. The CR07+ Classic rollerski therefore has a low center of gravity, the best guidance characteristics required for classic skating, and offers a uniquely direct feel on the foot. The high-strength aluminum swing arms are manufactured in an elaborate process, are extremely durable and very rigid, ensuring safe downhill performance even on winding roller tracks.

The SRB Classic wheels are available for the CR07+ in Medium and Comfort speeds. The wheels are marked analogously with "M" and "C".

Premium classic wheels
The rim is permanently bonded to the tire rubber using a specially selected vulcanization process. The tires' own rubber compounds have been specially designed for this application and are constantly being further developed through constant collaboration with competitive athletes from a wide range of Nordic disciplines. The ingredients used in the compounds guarantee very high mileage, are highly abrasion-resistant, vibration-damping and offer a high, non-slip safety standard on both dry and wet surfaces, i.e. always optimum grip. This guarantees a very safe, comfortable and cushioning ride on very fine and rough surfaces.

The medium rubber has become the benchmark and is ridden in countless training kilometers, comparison tests and competitions. This wheel has the best grip and the most ski-like speed.

The Comfort rubber is the more comfortable, but the faster. You are actually contradicting yourself. SRB has done it. The wheel is a special development for Scandinavia, all comfort-oriented runners and bad roads. The rolling resistance is noticeably reduced, the speed increased and the damping enormously improved. The grip on cold, wet surfaces is slightly reduced. Nevertheless, it is a very safe bike and perfect for long training sessions or mountain runs on mountain passes.

SRB+ spar
The unique SRB aluminum spar was specially developed to meet the requirements of a high-end roller ski. Through the combination of an optimized geometry and a special alloy, the wall thickness has been significantly reduced. The result is an enormous weight saving. The spar is both torsionally rigid and flexible like a ski. The properties of a flex spar are surpassed once again. It enables an optimal and ski-like riding experience. The SRB bar absorbs vibrations caused by rough road surfaces and thus enables a joint-friendly and highly comfortable ride on any asphalt surface. All SRB bars are pre-drilled/prepared for mounting the most common bindings.

Classic axle systems
SRB uses only the highest quality ball bearings on the market from the German brand ©FAG. These are lubricated for life and maintenance-free. The ©INA backstop also offers consistent and reliable quality. The whole thing is rounded off with our own axle system with a polygonal connection between the anti-twist axle and the forged rocker arms and pan head screws on the axles, which prevents the risk of collisions and therefore falls.

Made in Germany
Starting with the machining of the components, the coating and printing, the complete assembly, packaging and shipping are carried out in-house or by local suppliers. The high demands on quality, ecological and social responsibility do not deter us from this philosophy.

Information on EU Regulation GPSR

Name of the manufacturer: SRB Skiroller GmbH
Postal address of the manufacturer: Talstraße 66, 985445 Zella Mehlis, DE
Electronic address of the manufacturer: info@ski-roller.de