From its very beginning 10 years ago, the Marker Jester has ruled the mountain. The Marker Jester 16 ID continues that heritage, from the highest peaks and steepest lines all the way to the park and pipe. This year´s model was completely updated und tuned, just like the full range of Royal Family bindings.

Both the toe and heel are re-designed. Incorporating magnesium sole holders in front and the even lighter magnesium Interpivot 3 heel. This makes for less weight, higher stiffness and improved power transmission. The new Anti Ice Rail is pretty handy to scrap off the snow from the boot sole.

All Marker Royal Family bindings feature Power Width Design that make skis perform at their best. Due to the incorporated Sole.ID construction the Marker Jester 16 ID is compatible for both alpine and touring boots.

Features:
• Anti Ice Rail
• AFD Gliding Plate
• Sole.ID
• Inter Pivot Heel
• Magnesium Parts
• Triple Pivot Elite Toe

Details:
• DIN Range: 6.0 - 16.0
• Recommended driver weight: 60+ kg
• Standing height VB/heel: 24/20 mm
• Verstellbereich: 20 mm
• Toe piece: Triple Pivot Elite 3
• AFD sliding plate: stainless steel, height adjustable
• Heel: Inter Pivot 3
• Weight with brake (piece): 1070 g
• Shoe sole length Min - Max: 240 - 370 mm

Technology

Sole.ID
Height-adjustable gliding plateto be compatible with alpine (ISO 5355), touring (ISO 9523) and GripWalk soles.
Easy to adjust: pozi screw at the front to adjust height of gliding plate

AFD Gliding Plate
Marker bindings are equipped with a moveable AFD (anti friction device) supporting a precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application enhance optimized functionality - from racing, for children’s bindings or on ski tours.

Anti Ice Rail
Anti Ice Pads in the base of toe and heel (if no brake is installed) to prevent icing in critical areas

Inter Pivot Heel
The third and newest generation completely redone: improved power transimission, energy absorption and vertical heel elasticity combined with an improved step in comfort.

Triple Pivot Elite Toe
The toe construction with DIN/ISO up to Z 18 allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5° it provides the higher energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.

Please note: the selected stopper size should be the next largest, based on the center width of the ski (example: center width 95mm -> 100mm stopper). The selection "Size" corresponds to the stopper width.
When ordering a set we automatically mount the suitable stoppers without surcharge.